-
Analysis of Steam Valve Leakage due to Sealing
Dec , 15 2023
The sealing damage of the steam trap valve is the main cause of internal leakage of the valve. There are many reasons for valve sealing failure, among which the failure of the sealing pair composed of the valve core and valve seat is the main reason. There are many reasons that affect the damage of the valve sealing surface, including mechanical wear caused by incorrect selection, high-speed erosi...
view more
-
How Different Processes Affect the Selection of Trap Valves?
Dec , 15 2023
Given the wide variety of steam traps and their varying operating characteristics. Therefore, users often encounter difficulties when selecting steam traps. How to choose the correct steam trap to smoothly discharge condensate from the steam pipeline has become a challenge. The key considerations for selecting a steam trap include temperature and pressure range, drainage capacity, industrial valve...
view more
-
Installation, Use, and Maintenance Instructions for Butterfly Valves
Dec , 15 2023
1. Before installation, it is necessary to carefully check whether the logo and certificate of conformity of the butterfly valve meet the requirements for use. After verification, cleaning should be carried out. 2. Butterfly valves can be installed at any position on the equipment pipeline. However, if there is a transmission device, it should be installed vertically, that is, the transmission dev...
view more
-
Can Gate Valves and Globe Valves Be Used Interchangeably?
Dec , 15 2023
Structurally Gate valves can rely on medium pressure to tightly close the sealing surface, thereby achieving the effect of no leakage. When opening and closing, the sealing surface of the valve core and valve seat always come into contact and rub against each other, so the sealing surface is prone to wear. When the gate valve is close, the pressure difference between the front and back of the pipe...
view more
-
How to Distinguish between Rising Stem Gate Valves and Non-Rising Stem Gate Valves?
Dec , 15 2023
1. Non rising stem gate valve: The stem nut is located inside the valve body and in direct contact with the medium. When opening and closing the gate, rotate the valve stem to achieve this. The advantage of this structure is that the height of the gate valve remains constant, so the installation space is small, making it suitable for gate valves with large diameters or limited installation space. ...
view more
-
Installation and use of industrial check valve
Jun , 29 2022
Installation and use of industrial check valve Straight through lift check valve should be installed in horizontal pipeline, vertical lift check valve and bottom valve are generally installed in vertical pipeline, and the medium flows from bottom to top. The installation position of swing check valve is not properly limited. It is usually installed in horizontal pipeline, but it can also be instal...
view more
-
What is the difference between ball Valve and butterfly Valve
Oct , 29 2021
Ball valve and butterfly valve are two important categories of valves, which are widely used. Ball valve in high temperature and high pressure require strict sealing, flow resistance to small conditions. Butterfly valve is mainly used for low pressure, sealing requirements are not high, the classification of ball valve and butterfly valve is also more. Ball valve can be divided into: metal hard se...
view more
-
What is Check Valve & Why is Check Valve
Oct , 29 2021
Check valve is a kind of automatic valve, also known as check valve, one-way valve, return valve or isolation valve. It is a kind of valve whose opening and closing parts are round disc and whose action is produced by its own weight and medium pressure to block medium backflow. Disc movement is divided into lifting type and swing type. Lift check valve is similar to globe valve in structure, only ...
view more
-
What is Ball Valve & Why is Ball Vave
Oct , 29 2021
Ball valve is a kind of valve which uses a ball with a circular passage as the closure, and the ball rotates with the stem to realize the opening and closing action. The Closure of the ball valve is a ball with holes, which rotates around the axis perpendicular to the channel, so as to achieve the purpose of opening and closing the passage. The Ball valve is used to on/off the medium in pipel...
view more
-
What is Globe Vave & Why Globe Valve
Sep , 28 2021
Globe Valve opening and closing parts are plug-shaped disc, the sealing surface is flat or conical, and the disc moves linearly along the center line of the fluid, the movement forms of the valve stem include the lifting rod type (the valve stem rises and falls, but the hand wheel does not rise and falls), and the lifting rotary rod type (the hand wheel and the valve stem rise and fall together, a...
view more
email us yangjialing@dyyseo.com
